Simultaneous quantitative measurement of fourteen adrenal steroids by capillary column gas chromatography-mass spectrometry, and its clinical application

Until now, there has been little work covering all of the main native adrenal-cortical steroids in blood. We therefore established a method for the simultaneous quantitative measurement of 14 native adrenal-cortical steroids, which involves capillary column gas chromatography-mass spectrometry (GC--MS). Serum steroids were purified from serum with the Extrelut mini-column and then converted into stable derivatives for GC-MS by a combination of boronic cyclization and trimethylsilyl and methyloxime derivatization. The sensitivities (with a signal-to-noise ratio greater than or equal to 7) of our GC-MS method ranged from 0.1 to 1.0 ng/ml of serum, and the coefficients of variation of intra- and inter-assays were less than 19% for each steroid. Our newly devised method involving a capillary column GC-MS system has been proven to be a simple and suitable method for a diagnosis requiring simultaneous detection of many native adrenal steroids in clinical practice. The analysis time is only 4 h.     

Efficiency of radiation-induced main-chain scission of poly (methyl methacrylate) depends on the irradiation temperature because of coexisting monomer

Effect of irradiation temperature on the main-chain scission of poly (methyl methacrylate) (PMMA) caused by γ-irradiation was studied by means of gel permeation chromatography and ESR spectroscopy. Although no temperature dependency was observed on the scission efficiency for purified PMMA, the efficiency for crude or monomer-doped purified PMMA was decreased by decreasing the temperature below ca. 200 K. Above 200 K the efficiency was constant and did not depend on the purity of PMMA. ESR study of the irradiated PMMA revealed that the suppression of the scission below 200 K is induced by the addition of methyl methacrylate monomer to primary radical species, which otherwise cause the main-chain scission by warming the polymer above 200 K. The primary radical generated above 200 K immediately converts to the scission-type ? CH₂ ? ?(CH₃) COOCH₃ radical through the β-scission of the polymer main chain, so that the efficiency of the scission does not depend on both the impurity and the irradiation temperature. © 1994 John Wiley & Sons, Inc.     

Changes of electrochemical responses of the bulk solution species by thermotropic permeability of liquid crystalline membranes coated on electrodes

Liquid crystalline/polymer composite membrane-coated electrodes were prepared by casting a 1,2-dichloroethane solution of N-(4-ethoxybenzylidene)-4′-n-butylaniline (EBBA) and polycarbonate (PC) on an electrode surface. The temperature-dependence of the permeability of the EBBA/PC composite membrane on electrodes to Fe(CN)^3?₆ ion as a solution-phase redox ion was investigated by means of hydrodynamic voltammetry at a rotating disk electrode. The permeability changed with temperature over the range of the crystalline-nematic-phase transition temperature of EBBA. It is demonstrated that the observed temperature-dependence of the permeability reflects the thermotropic properties of EBBA in the EBBA/PC composite membrane. Furthermore, the dependence of the limiting current of the steady-state current-potential curves for the reduction of Fe(CN)^—₆ at the EBBA/PC composite membrane-coated electrode upon the membrane thickness, the blend ratio of EBBA and PC and the concentration of Fe(CN)^3?₆ in a bulk solution was examined in order to understand the transport process of Fe(CN)^?3₆ through the EBBA/PC composite membrane from the membrane/solution interface to the electrode/membrane interface. The transport process of Fe(CN)^3?₆ within the membrane was found to obey Fick's Law.     

Gold nanoparticle arrays directly grown on nanostructured indium tin oxide electrodes: Characterization and electroanalytical application

This work describes an improved seed-mediated growth approach for the direct attachment and growth of mono-dispersed gold nanoparticles on nanostructured indium tin oxide (ITO) surfaces. It was demonstrated that, when the seeding procedure of our previously reported seed-mediated growth process on an ITO surface was modified, the density of gold nanospheres directly grown on the surface could be highly improved, while the emergence of nanorods was restrained. By field emission scanning electron microscopy (FE-SEM) and cyclic voltammetry, the growth of gold nanoparticles with increasing growth time on the defect sites of nanostructured ITO surface was monitored. Using a [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻ redox probe, the increasingly facile heterogeneous electron transfer kinetics resulting from the deposition and growth of gold nanoparticle arrays was observed. The as-prepared gold nanoparticle arrays exhibited high catalytic activity toward the electrooxidation of nitric oxide, which could provide electroanalytical application for nitric oxide sensing.     

Total synthesis of apigenin 7,4′-di-O-β-glucopyranoside, a component of blue flower pigment of Salvia patens, and seven chiral analogues

We have succeeded in the first total synthesis of apigenin 7,4′-di-O-β-d-glucopyranoside (1a), a component of blue pigment, protodelphin, from naringenin (2). Glycosylation of 2 according to Koenigs-Knorr reaction provided a monoglucoside 4a in 80% yield, and this was followed by DDQ oxidation to give apigenin 7-O-glucoside (12a). Further glycosylation of 4′-OH of 12a with 2,3,4,6-tetra-O-acetyl-α-d-glucopyranosyl fluoride (5a) was achieved using a Lewis acid-and-base promotion system (BF₃·Et₂O, 2,6-di-tert-butyl-4-methylpyridine, and 1,1,3,3-tetramethylguanidine) in 70% yield, and subsequent deprotection produced 1a. Synthesis of three other chiral isomers of 1a, with replacement of d-glucose at 7 and/or 4′-OH by l-glucose (1b-d), and four chiral isomers of apigenin 7-O-β-glucosides (6a,b) and 4′-O-β-glucosides (7a,b) also proved possible.     

Ion-Selective Electrodes Based on Bilayer Film Coating

The electrode characteristics of ion-selective electrodes (ISEs) for K⁺, Na⁺, NH₄ ⁺, and Ca²⁺ based on bilayer film coatings, where the inner layer films are electroactive electropolymerized ones and the outer layer films are composed of conventional ion-sensitive materials, have been examined. These ISEs of the coated-wire electrode type have no conventional internal reference solution and reference electrode, but the inner films may be considered to function as the “internal standard solution.” The ion selectivity coefficients and the activity range showing Nernstian response were almost comparable to those of conventional liquid-membrane electrodes. The bilayer-coated ISEs showed insensitivity to O₂ and CO₂, long-term stability, and little drift. It was also found that the electrode performance is practically unchanged after sterilization in an autoclave. The results demonstrate that the bilayer-coated ISEs examined are promising for the determination of K⁺, Na⁺, NH₄ ⁺, or Ca²⁺ activity in biological and environmental systems.     

The Direct Partial Oxidation of Methane to Dimethyl Ether over Pt/Y2O3 Catalysts Using an NO/O2 Shuttle

Using a mixture of NO + O₂ as the oxidant enabled the direct selective oxidation of methane to dimethyl ether (DME) over Pt/Y₂O₃. The reaction was carried out in a fixed bed reactor at 0.1 MPa over a temperature range of 275–375 °C. During the activity tests, the only carbon‐containing products were DME and CO₂. The DME productivity (μmol g_cat^?1 h^?1) was comparable to oxygenate productivities reported in the literature for strong oxidants (N₂O, H₂O₂, O₃). The NO + O₂ mixture formed NO₂, which acted as the oxygen atom carrier for the ultimate oxidant O₂. During the methane partial oxidation reaction, NO and NO₂ were not reduced to N₂. In situ FTIR showed the formation of surface nitrate species, which are considered to be key intermediate species for the selective oxidation.     

A solid-supported acidic oxazolium perchlorate as an easy-handling catalyst for the synthesis of modified pyrimidine nucleosides via Vorbrüggen-type N-glycosylation

A solid-supported acidic oxazolium perchlorate was investigated as a heterogeneous catalyst in N-glycosylation reactions using silylated modified pyrimidines and an acylated ribose or glucose to afford the corresponding pyrimidine nucleosides. This salt is a nonhygroscopic and stable powder whose activity is comparable to that of 2-methyl-5-phenylbenzoxazolium perchlorate. A reaction with this polymer catalyst can be conducted on a gram scale. Reusability of the solid-supported catalyst was also investigated.     

Water‐disintegrative and biodegradable blends containing poly(L‐lactic acid) and poly(butylene adipate‐co‐terephthalate)

In this study, novel biodegradable materials were successfully generated, which have excellent mechanical properties in air during usage and storage, but whose structure easily disintegrates when immersed in water. The materials were prepared by melt blending poly(L ‐lactic acid) (PLLA) and poly(butylene adipate‐co‐terephthalate) (PBAT) with a small amount of oligomeric poly(aspartic acid‐co‐lactide) (PAL) as a degradation accelerator. The degradation behavior of the blends was investigated by immersing the blend films in phosphate‐buffered saline (pH = 7.3) at 40 °C. It was shown that the PAL content and composition significantly affected morphology, mechanical properties, and hydrolysis rate of the blends. It was observed that the blends containing PAL with higher molar ratios of L ‐lactyl [LA]/[Asp] had smaller PBAT domain size, showing better mechanical properties when compared with those containing PAL with lower molar ratios of [LA]/[Asp]. The degradation rates of both PLLA and PBAT components in the ternary blends simultaneously became higher for the blends containing PAL with higher molar ratios of [LA]/[Asp]. It was confirmed that the PLLA component and its decomposed materials efficiently catalyze the hydrolytic degradation of the PBAT component, but by contrast that the PBAT component and its decomposed materials do not catalyze the hydrolytic degradation of the PLLA component in the blends. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010